Step 1: PC Requirements Check Karein

• Windows 7, 8, 10, 11 (64-bit preferred)
• Minimum 4GB RAM aur Intel i3 processor ya zyada
• USB 2.0 ya USB 3.0 port (better connectivity ke liye)

Step 2: Qualcomm USB Drivers Install Karein

1. Qualcomm HS-USB QDLoader 9008 Drivers download karein.
2. Driver signature verification disable karein (Windows 10/11 users ke liye).
3. Device Manager → Ports (COM & LPT) me check karein, agar yellow warning ho to driver update karein.
4. PC restart karein aur dobara check karein.

Qualcomm devices different modes support karte hain jo alag-alag functions ke liye use hote hain:

Method 1: Normal Mode (ADB Mode)

1. Phone me USB Debugging enable karein (Settings → Developer Options → USB Debugging ON).
2. PC me ADB Drivers install karein.
3. Phone ko USB se connect karein.
4. CMD open karein aur command run karein: adb devices
5. Agar device show ho raha hai to connection sahi hai.

Method 2: Qualcomm 9008 (EDL Mode)

1. Phone completely power off karein.
2. EDL Mode enter karne ke 3 tareeqe:
   • (A) ADB Command: adb reboot edl
   • (B) Hardware Button: Volume Up + Volume Down press karke USB cable connect karein.
   • (C) Test Points: Back cover open karke test points short karein, phir USB cable connect karein.

Step 3: Device Manager Check Karein

1. Windows + R → type devmgmt.msc → Enter.
2. Ports (COM & LPT) section me “Qualcomm HS-USB QDLoader 9008” dikhna chahiye.
3. Agar error ya unknown device nazar aaye, to drivers dobara install karein.

1. Problem: Device 9008 Mode me detect nahi ho raha.
   Solution: USB cable & port change karein, drivers dobara install karein, Test Point ya EDL Cable use karein.
2. Problem: Sahara Handshake Error.
   Solution: Different Firehose File use karein aur flashing port change karein.
3. Problem: Fastboot Mode me device detect nahi ho raha.
   Solution: Bootloader unlock karein aur correct Fastboot Drivers install karein.
4. Problem: Phone bootloop ya hang ho gaya hai flashing ke baad.
   Solution: Recovery Mode se Factory Reset karein aur fastboot me bootloader lock karein.

• Step 1: PC & USB Drivers install karein.
• Step 2: Device mode (ADB, EDL, Fastboot, Diag) samjhein.
• Step 3: 9008/EDL Mode me phone enter karein.
• Step 4: Device Manager me check karein ke phone detect ho raha hai.
• Step 5: Flashing, unlocking, ya repair process start karein.

1. Q1: Qualcomm device connect karne ke liye sabse pehla step kya hai?
   A: PC requirements aur USB drivers install karna.
2. Q2: USB Debugging enable karna kis liye zaroori hai?
   A: ADB mode se device ko connect karne ke liye.
3. Q3: Fastboot mode me phone enter karne ka combination kya hai?
   A: Volume Down + Power Button.
4. Q4: EDL Mode me device connect karne ke liye test point method ka use kab hota hai?
   A: Jab phone completely dead ho ya boot nahi ho raha.
5. Q5: Agar device detect nahi ho raha to sabse pehla solution kya hai?
   A: Qualcomm USB drivers ko dobara install karna.

1. Q1: Qualcomm devices ko connect karne ke liye ______ requirements zaroori hoti hain.
   Jawab: system
2. Q2: ADB Mode me device connect karne ke liye ______ debugging enable honi chahiye.
   Jawab: USB
3. Q3: Fastboot Mode ke liye ______ button ka combination use hota hai.
   Jawab: Volume Down + Power
4. Q4: EDL Mode me device ko connect karne ke liye ______ ya deep flash cable ka use hota hai.
   Jawab: Test Point
5. Q5: Device Manager me agar “Qualcomm HS-USB QDLoader 9008” nazar aaye to iska matlab hai ke device ______ hai.
   Jawab: connected

1. Q1: Qualcomm device connect karne ke liye PC requirements ka kya role hai?
   A: Ye ensure karte hain ke system powerful aur compatible ho, jisse stable connection aur flashing process ho sake.
2. Q2: USB Debugging enable karne se kya hota hai?
   A: ADB Mode se device ko connect aur control karna mumkin hota hai.
3. Q3: Fastboot Mode se device ko connect karne ka fayda kya hai?
   A: Bootloader unlock aur custom recovery flashing ke liye use hota hai.
4. Q4: EDL Mode aur 9008 Mode ka istemal kyun hota hai?
   A: Ye dead boot repair aur firmware flashing ke liye sabse effective mode hai.
5. Q5: Agar device connect nahi ho raha, to sabse pehla troubleshooting step kya hai?
   A: Qualcomm USB Drivers ko reinstall karna aur different USB port try karna.

1. T/F 1: Qualcomm device connect karne ke liye system requirements bohot zaroori hain.
   Jawab: True
2. T/F 2: ADB Mode ke liye USB Debugging enable karna optional hai.
   Jawab: False
3. T/F 3: Fastboot Mode sirf bootloader unlock ke liye use hota hai.
   Jawab: False
4. T/F 4: EDL Mode se device connect karne ke liye Test Point ya Deep Flash Cable ka use hota hai.
   Jawab: True
5. T/F 5: Device Manager me “Qualcomm HS-USB QDLoader 9008” nazar aana signify karta hai ke device sahi connect ho gaya hai.
   Jawab: True