• Fastboot Mode ek low-level boot mode hai jo Android devices me bootloader unlock, flashing, partition management aur system-level modifications ke liye use hota hai.
• Ye mode specially Qualcomm, MediaTek (MTK), Samsung, aur Xiaomi devices me kaam karta hai.

Method 1: Physical Buttons Se

1. Phone ko Power Off karein.
2. Volume Down + Power Button ko ek saath 5-10 seconds tak hold karein.
3. Screen par Fastboot Mode show ho jayega.

Method 2: ADB Command Se

1. USB Debugging on hone par phone ko PC se connect karein.
2. PC par Command Prompt ya Terminal open karein.
3. Command likhein: adb reboot bootloader
4. Phone fastboot mode me chala jayega.

📍 Check Connected Fastboot Devices

fastboot devices

Ye command check karti hai ke device fastboot mode me connect hai ya nahi. Agar serial number show ho jaye to connection sahi hai.

---

📍 Bootloader Unlock (WARNING: Data Wipe Hoga!)

fastboot oem unlock

Ye command bootloader unlock karti hai. (Har phone pe kaam nahi karegi.)

Xiaomi Phones Ke Liye Bootloader Unlock:

fastboot oem unlock-go

Note: Xiaomi aur kuch devices me pehle official unlock permission chahiye hoti hai.

---

📍 Bootloader Lock Wapas Karna

fastboot oem lock

Ye command bootloader wapas lock kar deti hai (security reasons ke liye).

---

📍 Fastboot Mode Se Phone Reboot Karna

fastboot reboot

Ye command device ko normal mode me restart kar deti hai.

---

📍 Fastboot Mode Se Recovery Mode Boot

fastboot reboot recovery

Ye command phone ko recovery mode me boot karti hai.

---

📍 Fastboot Mode Se Custom Recovery Flash Karna

fastboot flash recovery recovery.img

Is command se custom recovery (TWRP, OrangeFox) flash ki jati hai.

---

📍 Fastboot Mode Se Stock Firmware Flash Karna

fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot flash cache cache.img
        

Ye commands alag-alag partitions flash karne ke liye use hoti hain.

Complete Stock ROM Flash Karne Ke Liye:

fastboot -w update firmware.zip

Ye command ek single zip file se pura firmware flash kar sakti hai.

---

📍 Fastboot FRP Remove (Factory Reset Protection Bypass)

fastboot erase config
fastboot erase frp
        

Ye commands FRP remove karne ke liye use hoti hain, lekin har phone pe kaam nahi karti (security patches ki wajah se).

---

📍 Partition Format (Factory Reset from Fastboot)

fastboot format userdata
fastboot format cache
        

Ye commands user data aur cache partition ko format kar deti hain.

• ⚠ Fastboot Mode sirf advanced users ke liye hai.
• ⚠ Bootloader unlock karne se data wipe ho jata hai.
• ⚠ Koi bhi flashing command execute karne se pehle backup zaroor banayein.
• ⚠ Kuch phones me bootloader unlock karne ke liye official permission chahiye hoti hai.

Agar aap kisi specific practical ka tutorial chahte hain, to please bataiye!

1. Q1: Fastboot Mode ka primary purpose kya hai?
   A: Bootloader unlock, flashing, partition management, aur system-level modifications ke liye use hota hai.
2. Q2: Physical buttons se Fastboot Mode enter karne ke liye kaunse buttons press karne hote hain?
   A: Volume Down aur Power Button ko ek saath 5-10 seconds tak hold karna.
3. Q3: ADB command se Fastboot Mode me enter karne ka command kya hai?
   A: adb reboot bootloader.
4. Q4: Fastboot Mode se device reboot karne ka command kya hai?
   A: fastboot reboot.
5. Q5: Stock firmware flash karne ke liye fastboot command kaun si hai?
   A: fastboot -w update firmware.zip.

1. Q1: Fastboot Mode se bootloader unlock karne ke liye command fastboot oem ______ use hota hai.
   Jawab: unlock
2. Q2: Fastboot Mode me device reboot karne ka command fastboot ______ hai.
   Jawab: reboot
3. Q3: Custom recovery flash karne ke liye command fastboot flash recovery ______ hai.
   Jawab: recovery.img
4. Q4: Fastboot Mode me FRP remove ke liye command fastboot erase ______ use hota hai.
   Jawab: frp
5. Q5: Fastboot Mode se partition format karne ke liye command fastboot format ______ hai (user data).
   Jawab: userdata

1. Q1: Explain the two methods to enter Fastboot Mode on an Android device.
   A: One can enter Fastboot Mode using physical buttons by turning off the device and holding Volume Down + Power for 5-10 seconds, or via ADB by executing adb reboot bootloader from a connected PC.
2. Q2: What precautions should be taken before executing Fastboot commands?
   A: Ensure that a backup is taken as bootloader unlock and flashing can wipe data, and confirm that the correct firmware is used.
3. Q3: How does the command fastboot devices assist in Fastboot Mode?
   A: It displays the list of connected devices in Fastboot Mode, verifying that the connection is successful.
4. Q4: What is the purpose of using fastboot -w update firmware.zip?
   A: This command is used to flash a complete stock ROM from a single firmware zip file.
5. Q5: Why is it important to have the correct USB cable and drivers when using Fastboot Mode?
   A: A proper USB connection and correct drivers ensure stable communication between the device and PC, reducing the risk of flashing errors or device damage.

1. T/F 1: Fastboot Mode is a low-level boot mode used for flashing and unlocking Android devices.
   Jawab: True
2. T/F 2: Entering Fastboot Mode via physical buttons requires holding Volume Up + Power.
   Jawab: False
3. T/F 3: The command fastboot oem unlock unlocks the bootloader, which may result in a data wipe.
   Jawab: True
4. T/F 4: fastboot reboot recovery boots the device into recovery mode.
   Jawab: True
5. T/F 5: Flashing commands should be executed only after taking a complete backup of the device.
   Jawab: True