Quiz Qualcomm EDL (Emergency Download) Mode – Complete Guide

By /
Qualcomm EDL Mode – Complete Guide & Quizzes (Roman Urdu)

Qualcomm EDL (Emergency Download) Mode – Complete Guide

⚡ EDL Mode ka use Qualcomm devices me firmware flashing, boot repair, IMEI fix, aur unbricking ke liye hota hai.
✅ EDL Mode ka istemal tab hota hai jab phone dead ho jaye, bootloop me fass jaye, ya fastboot/recovery mode se exit na ho.

1. Qualcomm EDL Mode Enable Karne Ke Methods

✅ EDL Mode me enter hone ke 3 tareeqe hain:

  1. Test Point Method (Most Reliable)
  2. ADB & Fastboot Commands (Agar Boot Working Ho)
  3. EDL Cable / Deep Flash Cable Method
2. Method 1: Test Point Se EDL Mode Enable Karna (Most Reliable)
  1. Step 1: Phone ka back cover carefully remove karein.
  2. Step 2: Motherboard par “EDL Test Points” locate karein.
  3. Step 3: Metal tweezer ya jumper wire ka use karke dono test points ko short karein.
  4. Step 4: Phone ko USB Cable se PC ke saath connect karein.
  5. Step 5: Test points ko 10-15 sec tak short rakhein, phir release karein.
  6. Step 6: PC me “Device Manager” open karein aur check karein; agar “Qualcomm HS-USB QDLoader 9008” show ho raha hai, to phone successfully EDL Mode me enter ho chuka hai.
  7. ✅ Ab aap QFIL, MSM Download Tool, ya QPST Tool se firmware flash kar sakte hain.
3. Method 2: ADB & Fastboot Commands Se EDL Mode Enable Karna
  1. Step 1: PC me ADB aur Fastboot Drivers install karein.
  2. Step 2: Phone ko USB Debugging mode me connect karein.
  3. Step 3: CMD open karein aur command run karein:
    adb reboot edl
  4. ✅ Phone directly EDL Mode me boot ho jayega.
  5. Alternate: Agar phone fastboot mode me fasa hai, to use karein:
    fastboot oem edl
  6. ✅ Agar command work kare, to phone EDL Mode me chala jayega. (Note: Bootloader unlocked hona zaroori hai.)
4. Method 3: EDL Cable / Deep Flash Cable Se EDL Mode Enable Karna
  1. Step 1: EDL Cable (Deep Flash Cable) ko PC me lagayein.
  2. Step 2: Phone ko cable se connect karein.
  3. Step 3: EDL Cable ka button press karein (10 sec tak hold karein).
  4. Step 4: Device Manager check karein; agar “Qualcomm HS-USB QDLoader 9008” show ho raha hai, to phone EDL Mode me hai.
  5. Note: Yeh method har device par kaam nahi karta, lekin Oppo, Vivo, aur Xiaomi devices me aksar work karta hai.
5. Qualcomm EDL Mode Se Firmware Flashing Ka Process
  1. Step 1: QFIL, MSM Download Tool, ya QPST Tool download karein aur install karein.
  2. Step 2: PC me “Qualcomm HS-USB QDLoader 9008” driver install karein.
  3. Step 3: Phone ko EDL Mode me connect karein.
  4. Step 4: Flashing tool open karein, “Select Build Type” me “Flat Build” choose karein.
  5. Step 5: “Programmer Path” me “prog_emmc_firehose.mbn” file select karein.
  6. Step 6: “Download” button press karein aur process complete hone ka intezar karein.
  7. Step 7: Phone ko reboot karein.
  8. ✅ Agar flashing successful ho jaye, to phone normally boot ho jayega.
6. EDL Mode Work Nahi Kar Raha? Solutions!
  1. Different USB Ports aur Cables try karein.
  2. Qualcomm USB Drivers reinstall karein.
  3. Test Points ko accurately short karein.
  4. Battery disconnect karke dobara try karein.
  5. Windows Device Manager check karein (driver installed hai ya nahi).
7. Summary – Qualcomm EDL Mode Complete Practical
  • EDL Mode ka use Qualcomm devices me boot repair aur firmware flashing ke liye hota hai.
  • Test Point Method sabse reliable aur common method hai.
  • ADB/Fastboot Commands tab best hain jab boot working ho aur bootloader unlocked ho.
  • EDL Cable / Deep Flash Cable kuch models ke liye best work karta hai.
  • Flashing ke liye QFIL, MSM Download Tool, aur QPST Tool use kiye jate hain.
  • Agar EDL Mode work nahi kar raha, to USB Drivers, cable, aur battery connection check karein.

Quizzes

Yeh quizzes Qualcomm EDL Mode ke key concepts ko test karne ke liye hain.

Quiz 1: Short Q&A (5 Questions)
  1. Q1: Qualcomm EDL Mode ka primary purpose kya hai?
    A: Firmware flashing, boot repair, IMEI fix, aur unbricking ke liye.
  2. Q2: Test Point Method kab use hota hai?
    A: Jab phone completely dead ho ya boot nahi ho raha.
  3. Q3: ADB & Fastboot Commands se EDL Mode enable karne ke liye phone ko kis mode me hona chahiye?
    A: USB Debugging enabled mode (boot working) aur bootloader unlocked.
  4. Q4: EDL Cable method me kaunsa button press karna parta hai?
    A: EDL Cable ka button, 10 seconds tak hold karna.
  5. Q5: Device Manager me “Qualcomm HS-USB QDLoader 9008” dikhna kya indicate karta hai?
    A: Phone successfully EDL Mode me enter ho chuka hai.
Quiz 2: Fill in the Blanks (5 Questions)
  1. Q1: EDL Mode ka use Qualcomm devices mein ______ ke liye hota hai.
    Jawab: firmware flashing
  2. Q2: Test Point Method ke liye phone ka back cover ______ remove karein.
    Jawab: carefully
  3. Q3: Device Manager mein “Qualcomm HS-USB ______ 9008” dikhna EDL Mode enable hone ka signal hai.
    Jawab: QDLoader
  4. Q4: ADB Command method se EDL Mode enter karne ke liye command ______ run hoti hai.
    Jawab: adb reboot edl
  5. Q5: Fastboot mode me fasa hua phone EDL Mode mein jane ke liye command ______ use hoti hai.
    Jawab: fastboot oem edl
Quiz 3: Short Answer Questions (5 Questions)
  1. Q1: Qualcomm EDL Mode ka primary maksad kya hai?
    A: Ye mode firmware flashing, boot repair, IMEI fix, aur unbricking ke liye use hota hai.
  2. Q2: Test Point Method se EDL Mode enable karne ka process kya hai?
    A: Phone ka back cover carefully remove karke, motherboard par test points locate karna, unhe short karke, USB se connect karna, aur 10-15 sec tak short rakhna.
  3. Q3: ADB & Fastboot Commands se EDL Mode enable karne ke liye kya zaroori conditions hain?
    A: Phone ka boot working, USB Debugging enabled, aur bootloader unlocked hona.
  4. Q4: EDL Cable method kis surat me use kiya jata hai?
    A: Jab Test Point Method available na ho ya ADB/Fastboot method fail ho jaye.
  5. Q5: Agar EDL Mode work nahi kar raha, to troubleshooting ke liye kya steps liye jate hain?
    A: Different USB ports aur cables try karna, Qualcomm USB Drivers reinstall karna, Test Point ko dobara accurately short karna, aur PC restart karna.
Quiz 4: True/False (5 Statements)
  1. T/F 1: EDL Mode sirf firmware flashing ke liye use hota hai.
    Jawab: False
  2. T/F 2: Test Point Method sabse reliable tareeqa hai jab phone dead ho jaye.
    Jawab: True
  3. T/F 3: ADB Command method se EDL Mode enable karna tab kaam karta hai jab bootloader unlocked ho.
    Jawab: True
  4. T/F 4: EDL Cable method har Qualcomm device par work karta hai.
    Jawab: False
  5. T/F 5: Reinstalling Qualcomm USB Drivers can help if EDL Mode fails to enable.
    Jawab: True

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top